Electrocoil
Profile of Electrocoil
Live blue wire is for demostration purposes. Galvanised wire will be supplied.
Electrocoil is designed to provide an intruder detection signal and if required can also provide a high non-lethal 5000 - 7000 Volt repulse shock,
- low cost
- simple to errect
- effective
- false alarm minimised
Outer Coil
Incorporates a standard coil of barbed tape concertina manufactured in accordance with USA Mil. Specification: ML 52489 (CME) June 1980 fully galvanised
Inner Coil
3 mm diameter smooth galvanised wire
Insulators
60% glass, dough moulded compound. U.V. stabilized, fire resistant, resists 16000 volts wet condition and 25000 volts dry condition.
Insulators tie wire
1.6 mm diameter galvanised wire
Energiser
Electrication distance: 1000-2000 m
Includes
- 220V / 12 V transformer
- Battery - 48 hour reservoir
- Battery charger
Can be operated with 220 Volt supply or solar cells.
A standard car battery will provide approximately 10 days supply.
Schematic Diagram of Electrocoil
Conductor/alarm coil
As intruder moves onto the outer coil (earth) they touch the inner coil (live) which activates an alarm (or if the intruder earths the inner live coil he sets-off the alarm)
Optional Repulse Shock In addition to the alarm detection system, a high voltage (5-7000 Volt) current can be fed into the system which will give an intruder a non-lethal repulse shock (this is an optional feature of the energiser)
Energised wire
Razor wire
Energiser
Profile of Razor Wire
High tensile steel wire virtually impossible to cut with standard tools
with razor sharp barbs at close intervals provides an awesome deterrent
|